USBid has sourced and supplied part number T7522APE and similar parts since 1998. For fastest service, please use the Quote Form for an immediate response, often in less than one business day. USBid, Inc. is the global marketplace for electronic components with over 450,000 line items of obsolete, allocated and discontinued electronic components. Part number T7522APE and our other In-Stock parts ship within 1-5 days depending upon the location of our warehouse.
IC, PCM CODEC, SINGLE, CMOS, DIP, 24PIN, PLASTIC
AT&T Microelectronics was the semiconductor division of AT&T Corporation, based in Allentown, Pennsylvania, USA until it was spun off with Bell Labs and other assets to form Lucent Technologies in 1996. The semiconductor division was again split off to form Agere Systems Inc., in 2002. Agere then merged into LSI Corporation in 2007. AT&T Micro primarily sold custom telephone and communications devices to AT&T and later sold DSPs, FPGAs, SRAMs, solid state relays, R/W chips, and other products to the open market.
In microelectronics, a dual in-line package (DIP) is an electronic device package with a rectangular housing and two parallel rows of electrical connecting pins. The package may be through-hole mounted to a printed circuit board or inserted in a socket. Dual-in-line packages were developed in the 1960s when the restricted number of leads available on transistor-style packages became a limitation in the use of integrated circuits. Increasingly complex circuits required more signal and power supply leads (as observed in Rent's rule); eventually microprocessors and similar complex devices required more leads than could be put on a DIP package, leading to development of higher-density packages. A DIP is usually referred to as a DIPn, where n is the total number of pins. For example, a microcircuit package with two rows of seven vertical leads would be a DIP14. The photograph at the upper right shows three DIP14 ICs. Common packages have as few as four and as many as 64 leads. Many analog and digital integrated crcuit types are available in DIP packages, as are arrays of transistors, switches, light emitting diodes, and resistors. DIP plugs for ribbon cables can be used with standard IC sockets.
Preapproved: In production with listed manufacturer
We show T7522APE as being available to us from vendors in... Please Call.
T7522APE pricing is dependent on quantity, availability and the level of testing required for this part. Please call (321) 725-9565 to talk to a sales representative.
|Part Summary - T7522APE|
|Manufacturer||AT&T MICROELECTRONICS (LSI CORPORATION)|
|Description||IC, PCM CODEC, SINGLE, CMOS, DIP, 24PIN, PLASTIC|
|Basic Part Information|
|Alternate Part(s)||0 Alternate Part(s)|
|Similiar Part(s)||Similiar Part(s)|
|Datasheet||No Datasheet Found|
|Condition||New / Unused|
Copyright © 1999-2015
TESTING - USBid, Inc. All rights reserved